• 設為首頁
                                    • 加入收藏
                                    產品分類
                                    固定式螺桿空壓機
                                    移動式螺桿空壓機
                                    空氣凈化設備
                                    儲氣罐
                                    空壓機配件
                                    聯系我們
                                    保定市啟源機械設備有限公司
                                    聯系人:王經理
                                    手機:13315253330
                                    電話:0312-7512212
                                    郵箱:qiyuanjixie@126.com
                                    網址:www.3mc-ic.com
                                    網址:www.qiyuanjixie.cn.alibaba.com
                                    地址:保定市高新區樂凱北大街愛迪硅谷產業園
                                    當前位置:空氣壓縮機組成結構

                                    空氣壓縮機組成結構
                                    Composition Structure of Air Compressor
                                    1::油循環系統
                                    1:Oil circulation system
                                    在啟動前,首先啟動油泵控制系統,油泵控制系統啟動后保證空壓機各潤滑部件潤滑良好,同時油泵控制系統可通過內置的溫控閥來調節內部油壓和油溫,以滿足系統需要。
                                    Before starting, start the oil pump control system first. After starting, the oil pump control system ensures good lubrication of the lubricating parts of the air compressor. At the same time, the oil pump control system can adjust the internal oil pressure and oil temperature through the built-in temperature control valve to meet the needs of the system.
                                    2:氣路循環系統
                                    2: Gas circulation system
                                    壓縮機工作時,空氣經過自潔式空氣過濾器被吸入,通過PLC自動清洗過濾器,空氣在經過進口導葉自動調節后進入一級壓縮,經一級壓縮后的氣體溫度較高,然后進入中間冷卻器進行冷卻(水走管內,氣走管外,中冷器的水流量要求為110m/h)之后進入二級壓縮系統,為避免系統中的氣體倒入壓縮腔內(避免帶壓起動)在壓縮機的排氣管道安裝有一只懸掛全啟式止回閥,壓縮機排出的氣體推開止回閥進入排氣消聲器,然后進入一級后冷器,二級后冷器,再進入排氣主管道。
                                    When the compressor works, the air is absorbed through the self-cleaning air filter, and the filter is automatically cleaned by PLC. After the air is automatically adjusted by the inlet guide vane, it enters the first stage compression. After the first stage compression, the gas temperature is higher. Then it enters the intermediate cooler for cooling (water running in the pipe, outside the gas running in the pipe, water flow of the intercooler is www.xiekou.net.cn www.wantou.net.cn www.buxiugangdai.net.cn www.zhenkongdiaoju.cn www.goucaoguanjia.cn www.kagu.org.cnrequired to be 110 m/h), and then enters the second stage compression system. In order to avoid the gas in the system pouring into the compression chamber (avoid starting with pressure), a hanging full-open check valve is installed in the exhaust pipe of the compressor. The gas discharged by the compressor pushes the check valve into the exhaust muffler, and then enters the first-stage rear cooler, the second-stage rear cooler and the exhaust main pipe.
                                    3:水路循環系統
                                    3: Water circulation system
                                    冷卻水通過管道進入空壓機中間冷卻器對一級壓縮排出的氣體進行冷卻降溫,再進入后冷器對排氣進行冷卻,另一路冷卻水進水管道經過主電機上部的兩組換熱器冷卻電機繞組,還有一路對油冷卻器進行冷卻。
                                    Cooling water enters the air compressor intermediate cooler through pipes to cool the first compressed exhaust gas, and then enters the rear cooler to cool the exhaust gas. Another cooling water inlet pipe passes through two sets of heat exchangers on the upper part of the main motor to cool the motor windings, and another way to cool the oil cooler.

                                    版權所有 ? 保定市啟源機械設備有限公司 保定網站建設遨游網絡
                                    電話:0312-7512212 手機:13315253330 聯系人:王經理 地址:保定市高新區樂凱北大街愛迪硅谷產業園1566號底商 網址:www.3mc-ic.com
                                    友鏈: 保定保潔 精密鑄造 u型槽模具 綠化苗木銷售 礦用電纜掛鉤 不銹鋼鑄件 銅鼎 玻璃鋼拍門
                                    精品人妻综合网性色